| Baud: | 115200bps |
| Parity: | N |
| Bits: | 8 |
| Stop Bits: | 1 |
| Hardware Flow Control: | Off |
| Software Flow Control: | Off |
Here is the pin mapping from the DL-10 (Male) on the system mother board to a DB9 (Male) so that you can use a standard NULL Modem cable to access the system.
| DL10 | DB9(Male) |
|---|---|
| 1 | NC |
| 2 | NC |
| 3 | 2 |
| 4 | NC |
| 5 | 3 |
| 6 | NC |
| 7 | NC |
| 8 | NC |
| 9 | 5 |
| 10 | NC |
The easiest way to build this cable is to by a standard PC serial port bracket and remove the DB9 from it and then resolder the correct pin mapping.
